Beds/Bedding/Pressure Care

The Pertinax Alternating Overlay is the best value, truly alternating system available. It consists of 21 8cm high cells (3 inch). Heavy duty straps fasten the system to any single mattress. Designed for home based patients or patients at light to moderate risk of pressure ulcers - this effective system is fantastic value for money.

Pertinax Homewave Alternating Overlay

• Schedule Code AB15
• Item No VET PTHW3

Pertinax Bluewave Alternating Mattress Replacement System

• Schedule Code AB15
• Item No VET PTHW8

Pertinax Homewave Alternating Overlay

• Schedule Code AB15
• Item No VET PTBW5P

Roho Mattress Overlay

• Schedule Code AB15
• Item No VET PTMATTRESS

• Straight forward pressure relief,
• Gives uniform patient pressure relief, for any single bed
• 21 individual pressure cells inflate and deflate on an alternating basis, ensuring pressure equalisation at every point
• Fits under the base sheet of any single bed
• Ripple control unit operates virtually silently, and there is no noise or vibration within the mattress, allowing the patient a sound nights sleep, in comfort

Codes

• Schedule Code AB14
• Item No VET 3062500

Over Bed Table - Adjustable Height

• Schedule Code AB13
• Item No VET BD575

Over Bed Table - Adjustable Height - 2 Post

• Schedule Code AB13
• Item No VET MH576

Over Bed Pole

• Schedule Code AB13
• Item No VET BDGL81

A powered rising backrest which can be fitted to single or double beds to raise and lower the user from lying to sitting up in bed.

The electric actuator plugs into the household supply and can be positioned on the right or left side of the frame. An emergency battery lowering device is included (9 volts). It has touch sensitive buttons which respond to minimal pressure. The backrest remains in the desired position as long as necessary and will not sink back down. Lifting angle varies from completely flat to a sitting position of 60 degrees.

It is secured under the mattress by means of strong straps, which attach under the bed base.

Dimensions

• Load Capacity: 127kg
• Weight overall: 13kg
• Overall Width: 960mm
• Overall length: 710mm
• Maximum angle of lift: 60 degrees
• Emergency Battery 9 volt type: MN1604
• Electric ActuatorDepth: 260mm

Codes

• Schedule Code AB18
• Item No VET 6C/01/25

• Schedule Code AB01
• Item No VET IVP-BED

• Schedule Code AB01
• Item No VET SHP

Engrit Electric Hi/Low Home Care Bed. Electric or height adjustment with electric elevating head raise and knee break mechanism. Head and foot boards. Lockable braking castors. Includes supply of standard mattress, bedrails and self help pole

• Minimum bed height: 370mm
• Maximum bed height: 670mm
• Bed length: 2000mm
• Weight capacity: 180kg
• Mattress size: 900x 1950mm

Codes

• Schedule Code AB01
• Item No VET ENHC01E

Engrit Manual Hi/Low Home Care Bed. Hydraulic height adjustment with manual head raise and knee break mechanism. Head and foot boards. Lockable braking castors. Includes supply of standard mattress, bedrails and self help pole.

• Minimum bed height: 370mm
• Maximum bed height: 670mm
• Bed length: 2000mm
• Weight capacity: 180kg
• Mattress size: 900x 1950mm

Codes

• Schedule Code AB01
• Item No VET ENHC01M

Back rest is adjustable by a simple ratchet mechanism.

Dimensions

570mm (h) x 500mm (w) x 390mm (d)

Codes

• Schedule Code AB02
• Item no VET LC3780

Made from a wedge-shaped foam contoured to hold a leg. The convoluted section will help with blood flow and pressure care under the calf. The patient’s heel should rest over the end so it is suspended in the air above the mattress. As this product is used with patients who will not move their legs off the elevator, we suggest that the Carer periodically moves the elevator up and down the leg to enable blood flow and alter the pressure on the back of the leg.

Patients can be on their sides when using the elevator and two elevators can be used for both heels if necessary.

The Bed Heel Elevator has a sweat-resistant wipeable cover. A cotton sheet can be draped over the elevator to help prevent sweating for some patients.

The wipeable, water resistant nylon cover can be removed for machine or hand washing at 80°C. Do not tumble dry the cover.

Codes

• Schedule Code AB17
• Item No VET 183